Welcome to DVD Cloner Copy World, Here you can find DVD Cloner, DVD Copy, DVD Burner...

Bookmark Me | Contact Us

DVD Cloner Copy Software

video converter

HOME | DOWNLOAD | BUY NOW | FAQ | CONTACT US  

DVD Burner Ripper Converter Software > DVD-Cloner > FAQ
  • What is DVD-CLONER?
    DVD-CLONER is a software that can copy your favorite DVD perfectly . In only half or one hour, you can burn your favorite DVD to DVD-RW with the same quality as the original DVD . It is not a VCD/SVCD format DVD .
     
  • How to order DVD-CLONER?
    Please click here to order. You will receive confirmation notice within one hour after payment. You should register DVD-CLONER with the CODE and EMAIL ADDRESS in the confirmation e-mail.
    Note: The code and email address which can be found in your order confirmation is the one that you should be used to register the downloaded demo of DVD-CLONER. After registration, you will get the full version.
    Without special directions, we will not ship the CD-ROM version of DVD-CLONER to you.
     
  • How can I register after payment?
    You will receive your registration code after we receive your payment. Then you can register with your register code and register email address.
    Registration procedure:
    1. Run DVD-CLONER Or Click "register" button on the main panel and a registration window will pop up.
    2. Enter your registration code and registration email address, click "register".
    3. After your registration completes, the "register" and "buy"  buttons will disappear.
    Now, you can enjoy the full version of DVD-CLONER!
    4. If you not success ,please follow the instruction to register it with the manual key.
    Please click here for more details!
     
  • Do I need to pay for the upgrading after registering?
    The upgrading is absolutely free for the registered user.
     
  • Can I buy DVD-CLONER by credit card?
    Yes, of course. Paying by credit card is the most effective way to get your registration code. Please click here to order DVD-CLONER.
     
  • Does your trial version has any limitation?
    Yes, the trial version of DVD-CLONER can only burn 1/5 of the DVD. While the full version can burn the whole DVD .
     
  • How much is DVD-CLONER?
    Our promoting price is $59.99.
     
  • What is DVD-CLONER's installation requirements?
    DVD-CLONER requires the following minimum configuration:
    * Pentium-II 450 MHz or faster processor
    * At least 64 MB of RAM
    * 5 GB free hard disc space for dvd-5. 10GB free hard disc space for DVD-9.
    * DVD BURNER
    * DVD ROM driver (optional)
    * Supported OS: Windows 2000, Windows XP (Windows 98, Windows 98se, Windows ME user ,Please download DVD-Cloner 2.20 version.
     
  • What operating systems does DVD-CLONER support?
    Our software works on Windows 2000 and Windows XP operating systems, We don't have versions working on Linux, Mac OS for the moment.
     
  • How to install DVD-CLONER on my PC?
    You may follow these procedures to install:
    1. Download our software on your computer.
    2. Double click the installing file.
    3. Follow the directions on the installing program.
    4. The installation completes successfully.
     
  • How to uninstall DVD-CLONER?
    Run the Add/Delete program from the control panel in Windows; choose and double click DVD-CLONER to uninstall the software.
     
  • How to upgrade DVD-CLONER? Do I need to register DVD-CLONER again?
    Please uninstall the old version and then install the new version. You need to register the new version of DVD-CLONER again. If you have any problems, please send email to us.
     
  • I have received my registration code. Why can't I register?
    Please note that you need to register DVD-CLONER ON-LINE ! If you still have problems , please click here to contact us. We will help you to register off-line.
     
  • I want to make several copies from one original DVD. Do I need to do it several times?
    NO. You may copy your DVD to HDD first, and then burn from HD to DVDr/rw disc. In this way, you can clone many discs from one original DVD, or a copied DVD.
     
  • Why does DVD-CLONER pop a message "Can't fit on 1 disc, please try 'movie only' or 'split discs' option!: Can't fit on 1 disc, please try 'movie only' or 'split discs' option!" when I clone a D-9 disc to 1 disc ?
    It may be one of the following reasons:
    1.Although DVD-CLONER has a very efficient encoding system, some D-9 discs are too large to fit on 1 disc. In this case, please copy with "movie only" option.
    2.This message may appear if DVD-CLONER fails to read your DVD movie. In this case,
    please make sure your DVD movies are readable.
     
  • What brands and models of DVD burners does DVD-CLONER support?
    DVD-CLONER supports most popular DVD BURNERS. If you need more detailed information, please click here to check.
     
  • What are the HD requirements ?
    If you are running the trial version of DVD-CLONER, you need 2 GB of free hard drive space. As for the full version of DVD-CLONER, requirements are as much as double the DVD capacity of free hard drive space. For example, DVD-5 format DVDs require 5GB or so ; DVD-9 format DVDs require 10GB or so . Please select the proper hard drive and save it to the TEMP directory.
     
  • Does DVD-CLONER support DVD-5 and DVD-9 DVD movies?
    Yes, it does
     
  • How long does it take for DVD-CLONER to burn a DVD?
    It depends on the configuration of your computer, burning speed and the DVD movie itself. From 1/2 hour to 2 hours is normal. We once tested a D9 (Jumanji, original disc 6.92G, target disc 4.7G). It just took 45 minutes.
     
  • Can I order more than one copy of DVD-CLONER?
    Of course , you can. Please contact our market department
     
  • Why some DVD+(-)RW discs burned with DVD-CLONER can not be played on DVD DRIVE or DVD PLAYERS?
    Please check the followings:
    1. Make sure your DVD DRIVE or DVD PLAYERs support DVD+(-)RW.
    2. Instead of DVD+(-)RW , try to burn to DVD(+)-R which is more compatible.
     
  • How can I know if I am ready to register on-line?
    Please make sure your computer has been connected to the Internet and click here to test. If you see a message "Your network is working!", you can begin to register DVD-CLONER ONLINE. If you can't see this message, please contact us.
     
  • Why I haven't got a response from the technical support department?
    1. Make sure your email is not longer than 30KB. Otherwise, our system will delete it automatically as a virus- infected email.
    2. As a result of ISP shielding, our email server might return your email on some occasions. Please try again using a different email address.
    3. Because business has been increasing, we might not receive your email on time when our server is busy.
    4. Our reply might be shielded by your email server. Please contact us again for a response asap.
     
  • What should I do if the second DVD-RW made by DVD-CLONER (Clone mode is "split discs") can not be played on a DVD player?
    In this case, you can choose " MOVIE ONLY" . Then there won't be any restrictions caused by setting MENU.
     
  • Can DVD-CLONER support macro vision?
    Yes, absolutely.
     
  • Can DVD-CLONER support external DVD BURNERS?
    Yes.
     
  • Can I backup DVDs to my HD with DVD-CLONER?
    Certainly you can :
    1.Click the Button next to the "TO" field.
    2.There will pop up a browse window.
    3.Select a directory to save the output files and then click "Yes".
    Then DVD-CLONER will copy the source DVD to the certain directory instead of burning the DVD movies to the blank DVD-R/RW or DVD+R/RW directly.
     
  • How to clone a D-9 disc to a D-5 disc by DVD-CLONER ?
    Click the option form and change "clone mode" option to "Fit on 1 disc". After that, click "begin" to clone.
     
  • How to clone a D-9 disc to a D-9 disc by DVD-CLONER ?
    First of all, your must have a DVD burner that supports Double layer discs (Such as SONY 700A) and a double layer disc (8.5GB). Click the option form and change "clone mode" option to "Fit on 1 disc" and make sure the check box "Copy to D9" is checked. Then, click "begin" to clone.
    When the burn procedure is beginning, the disc in the burner will be ejected if it is not a double layer disc. Be careful, because double layer DVD+R can be burnt only once. And make sure your source DVD movie is D-9 . It is extravagant to burn a D-5 movie to a D-9 disc. For more details about double layer disc (D-9),please click here .

     
  •  

    :::: WHAT'S NEW ::::
     
    NOV. 01, 2004
    DVD-CLONER V2.35

    Mightier DVD-CLONER V2.35.
    State-of-the-art dvd burners compatible.
     
    21 July,2004
    DVD-CLONER V2.30

    Upgraded burning engine, support more DVD burners!
    Fixed lots of minor bugs.
    Optimized decoding kernel.

     
    :::: User Testimonials ::::
     
    "...Really good! Just one click and it's done...."

    "...Fantastic interface, considerate functions and wonderful experiences!..."

    "...It's impressive to compress a movie on 1 disc. Save discs, save money..."
     
    :::: Warning ::::
     
    It's against the law to make illegal copies of copyrighted material! You are on your own in regard to any legal issues.
     
     

    webmaster@dvd-burner-ripper.com
    Copyright © 2001-2007 X Software, Inc.
    All rights reserved.